Yamaha Music - Page 5 - Recent Questions, Troubleshooting & Support

I expect you updated the wrong version or it crashed before it finished updating. The only version is v3.06. Any other will crash it permanantly. This might work; https://usa.yamaha.com/support/faq/keyboards/1478.html

Hi, The reason for no sound could be many things. Do you have power to the keyboard ( Red light, display lit up ? ) If not could be power supply or power input socket ( these fail and need repairing frequently on older models ) If you have power then check nothing stuck in headphone socket as this would stop sound. If nothing stuck in headphones, does it work on headphones. If it does it is probably the amplifier that has stopped working. If you can provide more specific I may be able to help further. Dan

You can visit this page for instructions: https://guitardongtam.com/guitar-enya-ea-x1

I have psr s950 Power not on,its the fuse have at this Piano or not?

The contacts of various switches and keys are likely dirty. They are often conductive rubber and need cleaning with 99% isoprophly alcohol and q-tip. Clean both the conductive rubber pill and th circuit board traces they contact.

Yamaha electone organ have no sound el 25 need help thnks...

If everything is lighting up but no sound. Ensure nothing in headphone socket, try master reset, hold top C key while turning on. If noting improves open up and replace Capacitor C216 & C217 Quite a common fault. Hopefully this will solve the issue. https://beckettsmusic.co.uk/products/10016v

Check output via headhones - if that works try connecting outputs to amplifier i if that works. Hold down highest sounding key whilst turning on, this initiates a factory reset. If still no sound open up check speakers are connected, if still no sound then suspect the amplifier has failed.

The video card is going bad. you have to replace

b?n ki?m tra b?n d??i c? d?y n?i v?i bedan kh?ng, xem v?t c?a n? c? b? l?ng kh?ng. b?n c? th? xem c?ch kh?i ph?c t?i ??y https://guitardongtam.com/

David What is the problem you are having? I have some info on CVP85/87 which shares the same service manual. Let me know and I may be able to pass on some info.

1) Try a partial reset by holding down the last white key while turning the unit ON. 2) If you haven't recorded any performance(s), for a full reset, hold down on the last white key AND THE lst three black keys while turning the unit ON.

Best advice would come from Yamaha itself. Here's the link to Customer Service- Contact Us Support Yamaha United States

It is usually caused by poor contacts between the keypad and the conductive rubber strip under the keys. The rubber strip comes as a complete part.

There is power from the power supply if the logo is on the screen, although it could be it isnt providing full current. Whilst the logo is displayed the machine carries out a number of checks to ensure it is working correctly. Once these checks are completed it moves to showing the voices etc. If it hangs it has found a fault and further investigation will be required.

It depends on the make and model of pre amp.

Hi,
Since your keyboard works fine with the PC. That means the problem is with the keyboard's Speaker. Either your speaker cable or speaker itself is not working... you have to identify that whether the problem is of speaker wire or speaker.... see that whether the service manual of your gadget is available or not.. if available then purchase the same. It will help you a lot for while repairing
Hope this has helped you....
Thanks...

I have same issue anyone have any ideas?

My Yamaha P85 had a no sound problem too. I replaced the two 100uf capacitors at locations C216 and C217 on the board where the DC power plug connects. Fixed it right up.

Order the service manual from Yamaha.