Press enter to search.
The Online Motorbike Doctor
steve posted an answer for this Motorcycles:
"I have a 1992 Virago 1100, front cylinder misfires at idle. Runs great on the road but..."
"Replace the coil lead & plug capRide safe
steve posted an answer for this 2002 Suzuki VS 1400 Intruder:
"my clutch loses pressure and i have to pump it up"
"Air in clutch hydraulics, bleed air outRide safe
"My clutch loses pressure and I have to pump it back up"
"Air in clutch hydraulics so bleed it outRide safe
steve posted an answer for this kawasaki Motorcycles:
"i just got forkboots how do they go on what do i need to do"
"Remove front wheel, undo the upper & lower triple clamp bolts that hold the fork legs..."
steve posted an answer for this 1997 Yamaha YZF 600 R thunder cat:
"The bike will go in gear but the clutch won't release"
"Remove clutch slave cylinder & push piston right in then refitRide safeBike-Doc"
"Bike was on stand. Removed front end and bike fell back onto rear wheel while in gear...."
"Broken selector claw springRide Safe
steve posted an answer for this 2007 Yamaha yZ 125:
"Why would the clutch cable on my yz 125 2007 just go slack"
"Engine starts .Then gas pouring out overflow line."
"Strip & clean carb then adjust float heightRide Safe
steve posted an answer for this 1982 Honda VF 750 S:
"High idle after the engine has warmed up. When I first start it, it idles fine, but after..."
"Synchronise carbsRide Safe
steve posted an answer for this Harley Davidson Motorcycles:
"bike pulls strong in every gear except third gear while in third gear if you take it easy..."
"The dogs on the gears are worn, strip & replaceRide Safe
steve posted an answer for this 2006 Harley Davidson FXDBI Street Bob:
"ESPFI RUNNING RICH"
"Adjust valve gaps to std
"IT ALSO SENDS PUFFS OF SMOKE OUT THE AIR CLEANER"
"Set the valve gaps, the flame path is bypassing both inlet & exhaust
steve posted an answer for this 1984 Honda VT 500 C Shadow:
"Why is the cdi arcing to the frame of this bike"
"The cdi on my bike is burning through its wall to arc out to the frame"
"Either insulate the CDI completely by wrapping in plastic or similaror replace / repair..."
"fuel injected engine"
"What bike is this & is there a spark at the plug(s)Ride SafeBike-Doc"
steve posted an answer for this 2005 Suzuki RM 85:
"clutch not engaging"
"Does the clutch not engage( ie it slips & wont pull away) or does it not dis-engage..."
steve posted an answer for this Yamaha Motorcycles:
"tapits need adjusting inlet and eghaust"
Load more activity...
136,626 people helped
View all achievements