Trons get into more shorts.......
Brad Oberg posted an answer for this TallyGenicom 2265+ Matrix Printer:
"The 00000 code says that your board set is bad. There are 2 soulitions. First, replace the..."
Brad Oberg posted an answer for this TallyGenicom 2265+ Matrix Printer:
"with out having all the numbers from your error code on the screen (most needed is the..."
Brad Oberg posted an answer for this TallyGenicom 2265+ Matrix Printer:
"Most likely the timing strip is dirty. The timing strip is right below the carraige bar..."
Brad Oberg posted an answer for this HP W1707 LCD Monitor:
"check settings in the menu. Usally off timer is set either to shut off after s et amont of..."
Brad Oberg posted an answer for this Tally Line Matrix T6100 Printer:
"press and hold view linfeed down arrow and mode while powering up the printer. This will..."
Brad Oberg posted an answer for this Tally 6306 Matrix Printer:
"Hammer voltage 1 is generally the logic board. One of the driver fets have gone bad. If..."
Brad Oberg posted an answer for this Tally 6306 Matrix Printer:
"Hammer 1 is usally the logic board. One of the driver fets have given up the ghost. A new..."
Brad Oberg posted an answer for this Tally Dot Matrix T2265C Printer:
"On board replace IC5."
Brad Oberg posted an answer for this IBM ThinkVision L170 17" LCD Monitor:
"Sounds to me your high voltage powersupply is out. To repair open monitor and remove high..."
Brad Oberg posted an answer for this IBM Computers & Internet:
"Sounds to me your high voltage powersupply is out. To repair open monitor and remove high..."
Brad Oberg posted an answer for this IBM Computers & Internet:
"your powersupply has blown caps. On this model you will need 6 470uf and 2 100uf caps...."
Brad Oberg posted an answer for this Tally Serial Matrix T2155 Printer:
"specifically IC5 on the logic board is bad. Either replace the logic board or IC5."
Brad Oberg posted an answer for this Lexmark T642 Laser Printer:
"replace mother(logic)board"
Brad Oberg posted an answer for this Lexmark T644 Laser Printer:
"laser print head is bad."
Brad Oberg posted an answer for this Lexmark T630 Laser Printer:
"on power up press and hold go and return buttons. When registration menu appears, scroll..."
Brad Oberg posted an answer for this Lexmark T630 Laser Printer:
"How to clear the Lexmark T632 maintenance counter"
Brad Oberg posted an answer for this Tally Dot Matrix T2265C Printer:
"either your aga motor is bad or your board set is bad. Turn unit on watch the printhead..."
Brad Oberg posted an answer for this Tally Dot Matrix T2265C Printer:
"Your carraige motor is bad. 0000003 means 1 Horiz task active andMotor accell. Bad..."
Brad Oberg posted an answer for this Tally Dot Matrix T2265C Printer:
"T2265+ Printer with hardware alarm, +0355 +131 - -- 0000003+0377+0387"