I am best able to help those with basic electronics skills with access to test equipment.
Bill Heronemus posted a question about Refrigerators:
"I was able to get to the Unit today and it did have the LAL alarm with a -4 also cycled to..."
Bill Heronemus posted a question about Audio Players & Recorders:
"Looking for Value of R17, have not been able to find a Schematic or SM on web. Cannot..."
Bill Heronemus posted an answer for this Vizio L37 Television:
"It looks like the control board is not receiving a voltage that it is expecting to tell it..."
Bill Heronemus posted an answer for this Samsung HCN4727W 47" Rear Projection Television:
"Light bulb likely bad if a DLP type set - may also need a ballast assembly."
Bill Heronemus posted an answer for this Televison & Video:
"Bulb is trying to light, most likely bad.."
Bill Heronemus posted an answer for this JVC HD-56G787 Television:
"By poor color quality, do you mean that if you turn the color control all the way down,..."
Bill Heronemus posted an answer for this JVC XL-V333 Personal CD Player:
"The drive belt is either slipping or broken, keeping the cd tray from coming out."
Bill Heronemus posted an answer for this Samsung Ln46d550k1f:
"You may want to try unplugging the set for about 10 seconds. If that doesn't work, in the..."
Bill Heronemus posted an answer for this Vizio Televison & Video:
"The video for blu ray disks come out of the HDMI port and that has to be connected to the..."
Bill Heronemus posted an answer for this Air Purifiers:
"Not likely. Is the microswitch on the back where the air filter goes making contact? Is..."
Bill Heronemus posted an answer for this GE GFSS6KKYSS:
"Generally, I'd suspect the defrost timer being stuck or broken."
Bill Heronemus posted an answer for this Sony Alpha DSLR-A100 Digital Camera:
"I would make sure it's the contact pins by trying a different card. We've had one of our..."
Bill Heronemus posted an answer for this Paragon red 1911 4 oz. popcorn machine:
"Between 1/6 and 1/4 cup, according to the owners manual found here:"
Bill Heronemus posted an answer for this Vizio L32 32 in. LCD HDTV:
"Several things come to mind, depending on the system hookup. As long as the volume is not..."
Bill Heronemus posted an answer for this Coby TFTV3225 32 in. LCD TV:
"It sounds like the power supply is not coming up to power the rest of the set. I would..."
Bill Heronemus posted an answer for this Sony KDL-46XBR4 46 in. LCD Television:
"I would first check for defective capacitors on the inverter board that drives the..."
Bill Heronemus posted an answer for this Westinghouse Electric LD4655VX TV:
"It's likely a loose solder connection that acts up after a short warm up period or..."
Bill Heronemus posted an answer for this Vizio VA26LHDTV10T 26" 720p LCD HDTV:
"Sounds like a problem in the power supply. Possible bad capacitors if you can have it..."
Bill Heronemus posted an answer for this Olevia LT37HVS 37 in. LCD HDTV:
"This site should help if you've lost the owners manual...."
Bill Heronemus posted an answer for this Olevia LT32HVM 32 in. LCD Television:
"Do you mean that the source button on the TV itself does not switch to the input of the TV..."
Bill Heronemus posted an answer for this Vizio L32 32 in. LCD HDTV:
"If you could find a working used board (slim chance in my opinion) it may be a worthwhile..."
Bill Heronemus posted an answer for this LG 37LG30 37 in. LCD HDTV:
"Sounds like the problem could be in the power supply of the TV. Have a technican check..."
Bill Heronemus posted an answer for this Vizio L32 32 in. LCD HDTV:
"I have the exact same symptoms with the same model I'm working on now. So far, I have..."
Bill Heronemus posted an answer for this LG Televison & Video:
"LG 42LG5010 poor contrast half screen OK after warm up and switch off on"
Bill Heronemus posted an answer for this LG Televison & Video:
"It sounds like defective capacitors on the PSU board to me. "
Bill Heronemus posted an answer for this Televison & Video:
"42LG5010 LG Flat Sceeen TV Picture fault. Left side multiple images and jittering...."
Bill Heronemus posted an answer for this Televison & Video:
"If it is not a bad solder connection that comes and goes as you flex the set or tap..."