hhalldavid1 posted an answer for this Sewing Machines:
"try a new needle"
hhalldavid1 posted an answer for this Necchi Sewing Machines:
"SOUNDS LIKE CAM STACK. Built in cams for embroidery stitches"
hhalldavid1 posted an answer for this Euro-Pro Sewing Machines:
"a ball point needle size 14 or 16 should suffice"
hhalldavid1 posted an answer for this Sewing Machines:
"only if fire proof"
hhalldavid1 posted an answer for this Husqvarna Viking 1:
"sounds like a slack or broken drive belt $5 or 6 for a replacement"
hhalldavid1 posted an answer for this Sewing Machines:
"The frister rossmann machine is almost identical the manual is available free to download..."
hhalldavid1 posted an answer for this Brother LS-1520 Mechanical Sewing Machine:
"Hold the bobbin case with open side towards you. The thread should unwind on the top of..."
hhalldavid1 posted an answer for this Singer 2250 Tradition:
"yes you must press the foot pedal as in normal sewing when you press the reverse lever..."
hhalldavid1 posted an answer for this Singer CE-200 Quantum Futura Computerized Sewing Machine:
"standard 2020 or 15x1 needles"
hhalldavid1 posted an answer for this Sewing Machines:
"try taking the capacitor out of the foot pedal. It bridges the two wires and will have..."
hhalldavid1 posted an answer for this Janome Sewing Machines:
"have you reset the free motion screw in the hand wheel?"
hhalldavid1 posted an answer for this Singer Sewing Machines:
"1951/2"
hhalldavid1 posted an answer for this Kenmore Sewing Machines:
"either the feed dogs are in down position or stitch length needs increasing"
hhalldavid1 posted an answer for this Singer 7436 - INGENUITY:
"You must have the presser foot fully down or you will get a warning beep. Raise the foot..."
hhalldavid1 posted an answer for this Singer 7436 - INGENUITY:
"1926/8"
hhalldavid1 posted an answer for this Sewing Machines:
"maybe needle tension needs to be reduced"
hhalldavid1 posted an answer for this Singer 7436 - INGENUITY:
"no such thing, bobbins are not timed, needles, hooks and feed dogs are timed"
hhalldavid1 posted an answer for this Brother PE770 Computerized Sewing Machine:
"ensure presser foot is down before threading the machine"
hhalldavid1 posted an answer for this Sewing Machines:
"try sewing with minimal top tension, and gradually increase until happy with stitches"
hhalldavid1 posted an answer for this Baby Lock Sewing Machines:
"check for correct type of needle and fit a new one"
hhalldavid1 posted an answer for this Sewing Machines:
"check the function of the needle thread tensioner"
hhalldavid1 posted an answer for this Singer Sewing Machines:
"sounds as if there is insufficient needle tension. clean and check tensioner"
hhalldavid1 posted an answer for this Singer CG590 Mechanical Sewing Machine:
"check needle is straight and fitted correctly"
hhalldavid1 posted an answer for this Bernina 1008:
"Hold the inner and turn the outer until it locks shaft"
hhalldavid1 posted an answer for this Janome DC3050 Computerized Sewing Machine:
"ensure the presser foot is fully down before the machine is threaded"
hhalldavid1 posted an answer for this PfaFF Sewing Machines:
"1st rule if machine has auto tension, it must be threaded with the presser foot down"
hhalldavid1 posted an answer for this Brother XL-2230 Mechanical Sewing Machine:
"if the machine was threaded at the time, the upper and lower threads will have jammed and..."
hhalldavid1 posted an answer for this Ford Cars & Trucks:
"sounds like a faulty control stalk"
hhalldavid1 posted an answer for this Apple MacBook Pro Laptop Computer with Intel Duo Core 15.4 Inch PC Notebook:
"try hitting control esc"