Craig posted an answer for this HP LaserJet 4730 MFP Printer:
"I had an issue similar to this and it was fixed by replacing the memory dimm on the bottom..."
Craig posted an answer for this HP LaserJet 9500n Printer:
"check the connector that the fuser connects to for damage. If the plug is intact you will..."
Craig posted an answer for this HP LaserJet 3050 All-In-One Printer:
"If the issue is when you print and scan/fax/copy you need to change the toner. Mos likely..."
Craig posted an answer for this Xerox Office Equipment & Supplies:
"19.003:48 is the error code 21274 is the number of pages the unit has printed. the error..."
Craig posted an answer for this Xerox Phaser 8500/DN Printer:
"19.003:48 is the error code 133950 is the number of pages the unit has printed. the error..."
Craig posted an answer for this Xerox Phaser 8500/DN Printer:
"19.003:48 is the error code 64663is the number of pages the unit has printed. the error..."
Craig posted an answer for this Xerox Phaser 8500/DN Printer:
"19.003:48 is the error code 33702 is the number of pages the unit has printed. the error..."
Craig posted an answer for this HP LaserJet 8150 Printer:
"EIO is the External Input Output slot that is on the formatter of the printer. the 8150..."
Craig posted an answer for this HP Office Equipment & Supplies:
"I am assuming you want to scan form your AiO to email if not please be more specific in..."
Craig posted an answer for this HEWLETT-PACKARD CM4540 AllInOne Laser Printer:
"If the MFP is working but the driver is showing off line. First try a reboot of the unit...."
Craig posted an answer for this HP LaserJet 8150 Printer:
"I have an idea of what the problem is but could you please elaborate."
Craig posted an answer for this HP Laserjet CM2320nf All-In-One Color Printer:
"The product has experienced a developer motor error Turn off the power and wait 30 seconds..."
Craig posted an answer for this HP LaserJet 3050 All-In-One Printer:
"I think that this is a driver setting issue. my guess would be to disable duplex..."
Craig posted an answer for this HP LaserJet Pro P1102W Printer:
"3 inches is approximately 70 or so mm so i would say you have a bad drum on your..."
Craig posted an answer for this HP LaserJet 4350dtn Printer:
"The tray 2 lifter-motor is not functioning Unfortunatly this usually requiers parts 1..."
Craig posted an answer for this HP LaserJet 4350dtn Printer:
"49.xx errors are mostly caused by invalid print commands, corrupt data, or invalid..."
Craig posted an answer for this HP LaserJet 4700 Printer:
"49.xx errors are mostly caused by invalid print commands, corrupt data, or invalid..."
Craig posted an answer for this HP LaserJet 4350 Printer:
"49.xx errors are mostly caused by invalid print commands, corrupt data, or invalid..."
Craig posted an answer for this HP LaserJet 8150dn Printer:
"Depending on what you are trying to print you might try updating the PCL driver or..."
Craig posted an answer for this HP LaserJet 8150dn Printer:
"62.XX error There is a problem with the printer's memory. The x value refers to the..."
Craig posted an answer for this HP LaserJet 8150dn Printer:
"If you put legal paper in tray 3 and it prints fine but letter size paper feeding long..."
Craig posted an answer for this HP LaserJet M3027 MFP All-In-One Printer:
"if you are getting a paper jam message but you can not find paper any where in the printer..."
Craig posted an answer for this HP LaserJet 4250n Printer:
"This unit needs to have a duplex unit installed if you want to duplex. If the back of the..."
Craig posted an answer for this Xerox Phaser 8500/DN Printer:
"the problem is either a bad process drive gear you need to update the firmware. you can..."
Craig posted an answer for this Xerox Phaser 8500/DN Printer:
"If you are getting a "jam in front cover" when you try to start your printer but you don't..."
Craig posted an answer for this HP Office Equipment & Supplies:
"When you installed the new router your network addresses changed on your computers so you..."
Craig posted an answer for this HP Color LaserJet 2600n Printer:
"a 55.1 error is a DC controller error. The device has experienced an internal hardware..."