2Senior Field Tech with a major company with 45 years experience.
Terry Dovre posted an answer for this Vizio Televison & Video:
"Hell0, have you tried using a different HDMI input and HDMI cable? If you do and still..."
Terry DovreTerry Dovre posted an answer for this Samsung Televison & Video:
"Hello, there's a couple of things to try. First unplug the tv, then unplug the "one..."
Terry DovreTerry Dovre posted an answer for this Hitachi Televison & Video:
"Hello, more than likely the set has bad back lights, a very common issue with these..."
Terry DovreTerry Dovre posted an answer for this Samsung Televison & Video:
"Hello, you DO NOT remove them, they are made on to the screen. The set more than likely..."
Terry DovreTerry Dovre posted an answer for this Samsung Televison & Video:
"Not possible, they are made on to the screen, they carry the info throughout the screen......"
Terry DovreTerry Dovre posted an answer for this Sharp Televison & Video:
"Hello, a very common issue with these sets, the back lights in the screen have gone..."
Terry DovreTerry Dovre posted an answer for this Insignia Televison & Video:
"Hello, the set has bad back lights , a very common issue with these sets. Thanks Techman..."
Terry DovreTerry Dovre posted an answer for this Samsung Televison & Video:
"Hello, The T-Con is built into the main board, and without the complete model and run..."
Terry DovreTerry Dovre posted an answer for this Samsung Televison & Video:
"Hello, unplug the main board from the power supply and plug the set back in, the back..."
Terry DovreTerry Dovre posted an answer for this Mitsubishi Televison & Video:
"Hello, one of the fans are bad or just clogged up, but only vacuum them off, NEVER blow..."
Terry DovreTerry Dovre posted an answer for this RCA Televison & Video:
"Is it a projection set without a model number I can only make a guess. If your using..."
Terry DovreTerry Dovre posted an answer for this Televison & Video:
"Hello, the noise was an LED exploding in the screen taking out the back lights..."
Terry DovreTerry Dovre posted an answer for this Sharp Televison & Video:
"Hello, it's one of two things, the main board has gone bad (part # DUNTKD934FM04-V2), or..."
Terry DovreTerry Dovre posted an answer for this Samsung Televison & Video:
"Hello, that set uses 2 LED strips that are no longer available and the 55" strips are..."
Terry DovreTerry Dovre posted an answer for this LG Televison & Video:
"Hello, there aren't back lights in a plasma set. It may have a bad y-sustain board part #..."
Terry DovreTerry Dovre posted an answer for this LG Televison & Video:
"Hello, either the power supply is failing to power up the LED's or the LED strips in the..."
Terry Dovre
Terry Dovre posted an answer for this LG 50PG20 50 in. Plasma HDTV:
"Hello, there are several things that it could be, but if the set comes on with a picture..."
Terry DovreTerry Dovre posted an answer for this LG Televison & Video:
"Hello, the power supply part # is EAY62810701"
Terry Dovre
Terry Dovre posted an answer for this LG 42LC2D 42 in. LCD HDTV:
"Hello, if the model number is correct it's not a projection tv, but an LCD tv. If that's..."
Terry DovreTerry Dovre posted an answer for this LG Televison & Video:
"Hello, those sets are notorious for the LED strips failing. I have replaced dozens of..."
Terry Dovre
Terry Dovre posted an answer for this LG 26LX2R 26 in. HD-Ready LCD TV:
"Hello, the power supply (part # 6871TPT303B) is the issue, usually capacitors that are..."
Terry Dovre
Terry Dovre posted an answer for this LG 50PX5D 50 in. Plasma HDTV:
"Hello that's a 2010 model set. It sounds like the y sustain board is failing (part #..."
Terry DovreTerry Dovre posted an answer for this LG Televison & Video:
"Hello, a screen shot of the issue is needed....thanks"
Terry Dovre
Terry Dovre posted an answer for this Sony Grand Wega Kds-60a2000 60-inch Sxrd 1080p Rear Projection Hdtv:
"Hello, How many times does the red light blink and repeat? Are you sure all the covers and..."
Terry DovreTerry Dovre posted an answer for this Hitachi Televison & Video:
"Hello, the convergence i.c.'s have failed. you will need to change both i.c.'s and check..."
Terry DovreTerry Dovre posted an answer for this Hitachi Televison & Video:
"Hello, the last I checked and that was several years ago, the screens were no longer..."
Terry DovreTerry Dovre posted an answer for this Mitsubishi Televison & Video:
"Hello, did you touch the face of the lamp? If you did, you will need to clean it off to..."
Terry Dovre
Terry Dovre posted an answer for this JVC HD-70FH96 70" Rear Projection HDTV:
"Hello, remove the lamp and make sure it didn't go bad. If it's ok the a color wheel or fan..."
Terry DovreTerry Dovre posted an answer for this Sony Televison & Video:
"Hello, this set is a CRT projection set, not a DLP that uses a lamp. If you have no..."
Terry DovreTerry Dovre posted an answer for this Mitsubishi Televison & Video:
"Hello, count the blinking light pattern. It may blink 2 to 9 times, pause and repeat the..."
Terry Dovre
Televison & Video 194 answers
Miscellaneous 1 answer
Sony FD Trinitron WEGA...
Sony FD Trinitron WEGA...