1
Todd Bozo posted an answer for this Simpson Washing Machines:
"Bleach goes in the left hand side portal softener is put in top of agitator an washing..."
Todd BozoTodd Bozo posted an answer for this Simpson Washing Machines:
"Check cold water inlet valve or any water restrictions ie.pinched inlet hose or low..."
Todd BozoTodd Bozo posted an answer for this Simpson Washing Machines:
"Possible bearing or gearbox problem I think."
Todd BozoTodd Bozo posted an answer for this Simpson Washing Machines:
"Try utube there is some videos there of similar machine designs that are very helpful or..."
Todd BozoTodd Bozo posted an answer for this Simpson Washing Machines:
"Check cold water inlet valve."
Todd BozoTodd Bozo posted an answer for this Washing Machines:
"Is it a grinding/grating noise?if so possibly bearings or if more of a whirring noise..."
Todd BozoTodd Bozo posted an answer for this Washing Machines:
"More then likely bearings,ours was bearings an a worn seal/packer..."
Todd BozoTodd Bozo posted an answer for this Amana Washing Machines:
"Possibly unbalanced load or machine not quite level,try a cycle without clothes,if it..."
Todd BozoTodd Bozo posted an answer for this Simpson Washing Machines:
"Could possibly be your cold inlet valve needs replacing or a water restriction somewere..."
Todd BozoTodd Bozo posted an answer for this Simpson Washing Machines:
"Pull top part of agitator off an there should be a locknut visible 10mm I think,remove..."
Todd Bozo
Washing Machines 10 answers
