Anonymous posted an answer for this Televison & Video:
"try site www.philips.com/urc"
Anonymous posted an answer for this 2001 Dodge Dakota:
"noelonot it sounds like your plug gaps are uneven. veilletcarli you need to be looking for..."
Anonymous posted an answer for this 2001 Dodge Dakota:
"check that the caliper slides are free and that you refiited the anti squel plates on the..."
Anonymous posted an answer for this 2001 Dodge Dakota:
"will it power up at the moment blck wire is always an earth to dash what sort of stereo is..."
Anonymous posted an answer for this 2001 Dodge Dakota:
"the solid black wire goes to earth on the steel sub structure of the dash and if you plug..."
Anonymous posted an answer for this Pioneer TS-SWX310 Car Subwoofer:
"fuses wont restrict the current flow the amp is way too much for that sub. it may not have..."
Anonymous posted an answer for this Car Audio & Video:
"contact your local ford workshop and they should help you"
Anonymous posted an answer for this Car Audio & Video:
"you need to check your fuses in case one blew out, try turning the lights on as the same..."
Anonymous posted an answer for this Cerwin Vega 154 Car Subwoofer:
"hi there by the sounds of things they may have connected a high input feed to the amp as..."
Anonymous posted an answer for this 1995 Honda Accord:
"hi there do you know if there is an alarm fitted to this car and if so do you have the..."
Anonymous posted an answer for this 1992 Honda Accord:
"biggest problem with the hondas is they have a bad cooling system, they tend to corrode..."
Anonymous posted an answer for this 1991 Honda Civic:
"it seems that you have a dirty air idle valve on the side of the manifold"
Anonymous posted an answer for this 1993 Mazda 323:
"you should look into the condition of your spark plugs the may have a very large gap over..."
Anonymous posted an answer for this 1993 Mazda 323:
"check the bulbs it is not uncommon for the bulbs to be incorrectly fitted"
Anonymous posted an answer for this 1993 Mazda 323:
"there are two possibilities for this problem one is that your master switch in the drivers..."