That I will try my best to help where I can
Anonymous posted an answer for this 1991 Chevrolet C1500:
"Make sure all the glow plugs are working."
Anonymous posted an answer for this 2003 Ford Focus:
"You have a cooling problem with this vehicle, what happens is that as soon as the engine..."
Anonymous posted an answer for this 2003 Ford Focus:
"The bearings on the wheels has to be installed one way only, the rotor ring is built into..."
Anonymous posted an answer for this Ford Cars & Trucks:
"If the vehicle is fitted with a Rocam engine, the valve clearance is not adjustable,..."
Anonymous posted an answer for this 2003 Ford Focus:
"There is actually a special tool for pushing the piston back, you could try and put some..."
Anonymous posted an answer for this 1998 Ford Expedition:
"If this is the mechanical unit it is possible that the wire in the back has come adrift or..."
Anonymous posted an answer for this 1988 Nissan Pulsar:
"You could fill it with automatic transmission fluid called ATF or oil called Dextron 2"
Anonymous posted an answer for this 1988 Nissan Pulsar:
"Make sure that the connections at the battery is clean and free of acid built up. Take the..."
Anonymous posted an answer for this 1988 Nissan Pulsar:
"Automatic vehicles does not have a flywheel, it is called a flex plate that is bolted onto..."
Anonymous posted an answer for this 1988 Nissan Pulsar:
"Not all switches switch the possitive side of the electrical cicuit, sometimes it switches..."
Anonymous posted an answer for this 1988 Nissan Pulsar:
"Have a look at the main wire that comes from the battery, sometimes they run from the..."
Anonymous posted an answer for this 2003 Kia Sorento:
"Have look at the tyre if you could see any bulges or have a look at the rim on the edge..."
Anonymous posted an answer for this Isuzu Cars & Trucks:
"Have a look at the breather on the transfer case, I had a symilar problem with my vehicle..."
Anonymous posted an answer for this 1994 Nissan Altima:
"Fill with transmission oil, if it is an auto the oil level has to be right before it will..."
Anonymous posted an answer for this 1997 Nissan Pathfinder:
"No not a good idea, there is some sertain settings that you have to do or the differential..."
Anonymous posted an answer for this 1988 Nissan Pulsar:
"The engine and the transmission is bolted together, it is always better to remove them at..."
Anonymous posted an answer for this 1988 Nissan Pulsar:
"Possibly the brake fluid level low inside the master cylinder so when you brake the fluid..."