Colin Stevens posted an answer for this Samsung Washing Machines:
"1e is usually a pressure sensor error. To open the door you will need to switch off the..."
Colin Stevens posted an answer for this Zanussi Washing Machines:
"sounds like you could have a problem with the door lock try and give the door a bang but..."
Colin Stevens posted an answer for this Washing Machines:
"when switch ON washing machine, the Course LED blinking and cannot press the other button."
Colin Stevens posted an answer for this Washing Machines:
"Whats the make and model no. as the LED's flashing is probably a fault indication...."
Colin Stevens posted an answer for this Zanussi F1045W Front Load Washer:
"Sounds like you've got something stuck in between the drum and tub the best way to check..."
Colin Stevens posted an answer for this Washing Machines:
"Can you hear the pump running if not the machine may be syphoning out, if the outlet is..."
Colin Stevens posted an answer for this Washing Machines:
"Usually it is the stator at fault with an LE error. I would make sure the cable between..."
Colin Stevens posted an answer for this Zanussi FJS1225W Front Load Washer:
"This indicates error code E90. Sometimes its a loose connection to the front control..."
Colin Stevens posted an answer for this LG TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher:
"OE error means the water hasn't pumped out. 1st you need to check the filter behind the..."
Colin Stevens posted an answer for this LG Washing Machines:
"DE is a door lock error it could be the door hasn't been shut firm enough or the door lock..."
Colin Stevens posted an answer for this Washing Machines:
"5 flashes is motor down to earth usually resulting in replacing the motor. Sometimes the..."
Colin Stevens posted an answer for this Zanussi TC7114W Electric Dryer:
"There is a thermostat inside the drum if you open the door and feel up the front you will..."
Colin Stevens posted an answer for this Zanussi ZWF1430W Front Load Washer:
"This is a motor problem the end light flashing 5 times indicates error E50. The motor has..."
Colin Stevens posted an answer for this Zanussi ZWF1430W Front Load Washer:
"Error E20 means the machine has failed to pump out. 1st check the filter at the bottom..."
Colin Stevens posted an answer for this Zanussi FJS1225W Front Load Washer:
"If you give the facia a tap the display may come back on. You may then get an error code..."
Colin Stevens posted an answer for this Zanussi FJS1225W Front Load Washer:
"E40 indicates the doors not closed properly. Sometimes it can be the lock itself or the..."
Colin Stevens posted an answer for this Zanussi FJS1225W Front Load Washer:
"Try pushing the skip button this may reset the prog. These machines will beep to indicate..."
Colin Stevens posted an answer for this Zanussi FJS1225W Front Load Washer:
"E10 means theres no water going into the machine.Your machine has a triple water valve the..."